Volume: 1Date: 2024-01-01Original Date: 2024-01-01Title: Section 21.123 - Production under type certificate.Context:
Title 14 - Aeronautics and Space. CHAPTER I - FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION. SUBCHAPTER C - AIRCRAFT. PART 21 - CERTIFICATION PROCEDURES FOR PRODUCTS AND ARTICLES. Subpart F - Production Under Type Certificate.
§ 21.123Production under type certificate.Each manufacturer of a product being manufactured under a type certificate must—(a) Maintain at the place of manufacture all information and data specified in §§ 21.31 and 21.41;(b) Make each product and article thereof available for inspection by the FAA;(c) Maintain records of the completion of all inspections and tests required by §§ 21.127, 21.128, and 21.129 for at least 5 years for the products and articles thereof manufactured under the approval and at least 10 years for critical components identified under § 45.15(c) of this chapter;(d) Allow the FAA to make any inspection or test, including any inspection or test at a supplier facility, necessary to determine compliance with this subchapter;(e) Mark the product in accordance with part 45 of this chapter, including any critical parts;
(f) Identify any portion of that product (
e.g.,
sub-assemblies, component parts, or replacement articles) that leave the manufacturer's facility as FAA approved with the manufacturer's part number and name, trademark, symbol, or other FAA-approved manufacturer's identification; and
(g) Except as otherwise authorized by the FAA, obtain a production certificate for that product in accordance with subpart G of this part within 6
months after the date of issuance of the type certificate.
Code of Federal Regulations /
Title 14 - Aeronautics and Space /
Vol. 1 / 2024-01-01154