677 

Federal Aviation Administration, DOT 

§ 29.1585 

(d) Each liferaft must have obviously 

marked operating instructions. 

(e) Approved survival equipment 

must be marked for identification and 
method of operation. 

§ 29.1565

Tail rotor. 

Each tail rotor must be marked so 

that its disc is conspicuous under nor-
mal daylight ground conditions. 

[Amdt. 29–3, 33 FR 971, Jan. 26, 1968] 

R

OTORCRAFT

F

LIGHT

M

ANUAL

 

§ 29.1581

General. 

(a) 

Furnishing information. A Rotor-

craft Flight Manual must be furnished 
with each rotorcraft, and it must con-
tain the following: 

(1) Information required by §§ 29.1583 

through 29.1589. 

(2) Other information that is nec-

essary for safe operation because of de-
sign, operating, or handling character-
istics. 

(b) 

Approved information. Each part of 

the manual listed in §§ 29.1583 through 
29.1589 that is appropriate to the rotor-
craft, must be furnished, verified, and 
approved, and must be segregated, 
indentified, and clearly distinguished 
from each unapproved part of that 
manual. 

(c) [Reserved] 
(d) 

Table of contents. Each Rotorcraft 

Flight Manual must include a table of 
contents if the complexity of the man-
ual indicates a need for it. 

(Secs. 313(a), 601, 603, 604, and 605 of the Fed-
eral Aviation Act of 1958 (49 U.S.C. 1354(a), 
1421, 1423, 1424, and 1425); and sec. 6(c), Dept. 
of Transportation Act (49 U.S.C. 1655(c))) 

[Amdt. 29–15, 43 FR 2327, Jan. 16, 1978] 

§ 29.1583

Operating limitations. 

(a) 

Airspeed and rotor limitations. In-

formation necessary for the marking of 
airspeed and rotor limitations on or 
near their respective indicators must 
be furnished. The significance of each 
limitation and of the color coding must 
be explained. 

(b) 

Powerplant limitations. The fol-

lowing information must be furnished: 

(1) Limitations required by § 29.1521. 
(2) Explanation of the limitations, 

when appropriate. 

(3) Information necessary for mark-

ing the instruments required by 
§§ 29.1549 through 29.1553. 

(c) 

Weight and loading distribution. 

The weight and center of gravity limits 
required by §§ 29.25 and 29.27, respec-
tively, must be furnished. If the vari-
ety of possible loading conditions war-
rants, instructions must be included to 
allow ready observance of the limita-
tions. 

(d) 

Flight crew. When a flight crew of 

more than one is required, the number 
and functions of the minimum flight 
crew determined under § 29.1523 must be 
furnished. 

(e) 

Kinds of operation. Each kind of 

operation for which the rotorcraft and 
its equipment installations are ap-
proved must be listed. 

(f) 

Limiting heights. Enough informa-

tion must be furnished to allow compli-
ance with § 29.1517. 

(g) 

Maximum allowable wind. For Cat-

egory A rotorcraft, the maximum al-
lowable wind for safe operation near 
the ground must be furnished. 

(h) 

Altitude.  The altitude established 

under § 29.1527 and an explanation of 
the limiting factors must be furnished. 

(i) 

Ambient temperature. Maximum 

and minimum ambient temperature 
limitations must be furnished. 

(Secs. 313(a), 601, 603, 604, and 605 of the Fed-
eral Aviation Act of 1958 (49 U.S.C. 1354(a), 
1421, 1423, 1424, and 1425); and sec. 6(c), Dept. 
of Transportation Act (49 U.S.C. 1655(c))) 

[Doc. No. 5084, 29 FR 16150, Dec. 3, 1964, as 
amended by Amdt. 29–3, 33 FR 971, Jan. 26, 
1968; Amdt. 29–15, 43 FR 2327, Jan. 16, 1978; 
Amdt. 29–17, 43 FR 50602, Oct. 30, 1978; Amdt. 
29–24, 49 FR 44440, Nov. 6, 1984] 

§ 29.1585

Operating procedures. 

(a) The parts of the manual con-

taining operating procedures must 
have information concerning any nor-
mal and emergency procedures, and 
other information necessary for safe 
operation, including the applicable pro-
cedures, such as those involving min-
imum speeds, to be followed if an en-
gine fails. 

(b) For multiengine rotorcraft, infor-

mation identifying each operating con-
dition in which the fuel system inde-
pendence prescribed in § 29.953 is nec-
essary for safety must be furnished, to-
gether with instructions for placing 

VerDate Sep<11>2014 

09:06 Jun 28, 2024

Jkt 262046

PO 00000

Frm 00687

Fmt 8010

Sfmt 8010

Y:\SGML\262046.XXX

262046

jspears on DSK121TN23PROD with CFR