882
14 CFR Ch. I (1–1–24 Edition)
§ 97.5
manual) at maximum certificated land-
ing weight with full flaps, landing gear
extended, and power off.
T means nonstandard takeoff mini-
mums or specified departure routes/
procedures or both.
TDZ means touchdown zone.
Visibility minimum means the min-
imum visibility specified for approach,
landing, or takeoff, expressed in stat-
ute miles, or in feet where RVR is re-
ported.
[Doc. No. FAA–2002–14002, 72 FR 31679, June 7,
2007]
§ 97.5
Bearings, courses, tracks, head-
ings, radials, miles.
(a) All bearings, courses, tracks,
headings, and radials in this part are
magnetic, unless otherwise designated.
(b) RVR values are stated in feet.
Other visibility values are stated in
statute miles. All other mileages are
stated in nautical miles.
[Doc. No. 561, 32 FR 13912, Oct. 6, 1967, as
amended by Amdt. 97–1336, 72 FR 31680, June
7, 2007]
Subpart B—Procedures
E
DITORIAL
N
OTE
: The procedures set forth
in this subpart were formerly carried as
§§ 609.100 through 609.500 of this title and
were transferred to part 97 as §§ 97.11 through
97.19, respectively, but are not carried in the
Code of Federal Regulations. For F
EDERAL
R
EGISTER
citations affecting these proce-
dures, see the List of CFR Sections Affected,
which appears in the Finding Aids section of
the printed volume and at
www.govinfo.gov.
§ 97.10
[Reserved]
Subpart C—TERPS Procedures
S
OURCE
: Docket No. 8130, 32 FR 13912, Oct.
6, 1967, unless otherwise noted.
E
DITORIAL
N
OTE
: The procedures for §§ 97.21
through 97.37, respectively, are not carried in
the Code of Federal Regulations. For F
ED
-
ERAL
R
EGISTER
citations affecting these pro-
cedures, see the List of CFR Sections Af-
fected, which appears in the Finding Aids
section of the printed volume and at
www.govinfo.gov.
§ 97.20
General.
(a) This subpart prescribes standard
instrument approach procedures and
takeoff minimums and obstacle depar-
ture procedures (ODPs) based on the
criteria contained in FAA Order 8260.3,
U.S. Standard for Terminal Instrument
Procedures (TERPs), and other related
Orders in the 8260 series that also ad-
dress instrument procedure design cri-
teria.
(b) Standard instrument approach
procedures and associated supporting
data adopted by the FAA are docu-
mented on FAA Forms 8260–3, 8260–4,
8260–5. Takeoff minimums and obstacle
departure procedures (ODPs) are docu-
mented on FAA Form 8260–15A. These
forms are incorporated by reference.
The Director of the Federal Register
approved this incorporation by ref-
erence pursuant to 5 U.S.C. 552(a) and 1
CFR part 51. The standard instrument
approach procedures and takeoff mini-
mums and obstacle departure proce-
dures (ODPs) are available for exam-
ination at the U.S. Department of
Transportation, Docket Operations,
1200 New Jersey Avenue SE, West
Building Ground Floor, Room W12–140,
Washington, DC 20590, and at Aero-
nautical Information Services, 1305
East-West Highway, Silver Spring, MD
20910, or at the National Archives and
Records Administration (NARA). For
information on the availability of this
material at NARA, email:
fedreg.legal@nara.gov, or go to http://
www.archives.gov/federal
_
register/
code
_
of
_
federal
_
regulations/
ibr
_
locations.html.
(c) Standard instrument approach
procedures and takeoff minimums and
obstacle departure procedures (ODPs)
are depicted on aeronautical charts
published by the FAA. These charts are
available from the FAA at
https://
www.faa.gov/air
_
traffic/flight
_
info/
aeronav/digital
_
products/.
[Doc. No. FAA–2002–14002, 72 FR 31680, June 7,
2007, as amended by Docket FAA–2018–0119,
Amdt. 97–1338, 83 FR 9172, Mar. 5, 2018; Dock-
et No. FAA–2022–1355, Amdt. No. 97–1339, 87
FR 75846, Dec. 9, 2022]
PART 99—SECURITY CONTROL OF
AIR TRAFFIC
Subpart A—General
Sec.
99.1
Applicability.
99.3
Definitions.
VerDate Sep<11>2014
14:00 Mar 14, 2024
Jkt 262047
PO 00000
Frm 00892
Fmt 8010
Sfmt 8010
Q:\14\14V2.TXT
PC31
aworley on LAPBH6H6L3 with DISTILLER