background image

874 

49 CFR Ch. I (10–1–23 Edition) 

§ 175.900 

materials required by § 172.403 of this 
subchapter to be labeled Radioactive 
Yellow–II or Radioactive Yellow–III 

closer than the distances shown in the 
table below to any package marked as 
containing underdeveloped film. 

Transport 

index 

Minimum separation distance to nearest undeveloped film for various times in transit 

Up to 2 hours 

2 to 4 hours 

4 to 8 hours 

8 to 12 hours 

Over 12 hours 

Meters 

Feet 

Meters 

Feet 

Meters 

Feet 

Meters 

Feet 

Meters 

Feet 

0.1 to 1.0 .......

0.3 

0 .6 

0.9 

1 .2 

1.5 

1.1 to 5.0 .......

0.9 

1 .2 

1.8 

2 .4 

3.3 

11 

5.1 to 10.0 .....

1.2 

1 .8 

2.7 

3 .3 

11 

4.5 

15 

10.1 to 20.0 ...

1.5 

2 .4 

3.6 

12 

4 .8 

16 

6.6 

22 

20.1 to 30.0 ...

2.1 

10 

4.5 

15 

20 

8.7 

29 

30.1 to 40.0 ...

2.4 

3 .3 

11 

5.1 

17 

6 .6 

22 

9.9 

33 

40.1 to 50.0 ...

2.7 

3 .6 

12 

5.7 

19 

7 .2 

24 

10.8 

36 

§ 175.900

Handling requirements for 

carbon dioxide, solid (dry ice). 

Carbon dioxide, solid (dry ice) when 

shipped by itself or when used as a re-
frigerant for other commodities, may 
be carried only if the operator has 
made suitable arrangements based on 
the aircraft type, the aircraft ventila-
tion rates, the method of packing and 
stowing, whether animals will be car-
ried on the same flight and other fac-
tors. The operator must ensure that 
the ground staff is informed that the 
dry ice is being loaded or is on board 
the aircraft. For arrangements between 
the shipper and operator, see § 173.217 of 
this subchapter. Where dry ice is con-
tained in a unit load device (ULD) pre-
pared by a single shipper in accordance 
with § 173.217 of this subchapter and the 
operator after the acceptance adds ad-
ditional dry ice, the operator must en-
sure that the information provided to 
the pilot-in-command and the marking 
on the ULD when used as a packaging 
reflects that revised quantity of dry 
ice. 

[82 FR 15892, Mar. 30, 2017] 

PART 176—CARRIAGE BY VESSEL 

Subpart A—General 

Sec. 
176.1

Purpose and scope. 

176.2

Definitions. 

176.3

Unacceptable hazardous materials 

shipments. 

176.4

Port security and safety regulations. 

176.5

Application to vessels. 

176.7

Documentation for vessel personnel. 

176.9

‘‘Order-Notify’’ or ‘‘C.O.D.’’ shipments. 

176.11

Exceptions. 

176.13

Responsibility for compliance and 

training. 

176.15

Enforcement. 

176.18

Assignment and certification. 

Subpart B—General Operating 

Requirements 

176.24

Shipping papers. 

176.27

Certificate. 

176.30

Dangerous cargo manifest. 

176.31

Special permits. 

176.36

Preservation of records. 

176.39

Inspection of cargo. 

176.45

Emergency situations. 

176.48

Situation requiring report. 

176.50

Acceptance of damaged or leaking 

packages. 

176.52

Rejections of shipments in violation. 

176.54

Repairs involving welding, burning, 

and power-actuated tools and appliances. 

Subpart C—General Handling and 

Stowage 

176.57

Supervision of handling and stowage. 

176.58

Preparation of the vessel. 

176.60

‘‘No Smoking’’ signs. 

176.63

Stowage locations. 

176.65

Alternative stowage procedures. 

176.69

General stowage requirements for 

hazardous materials. 

176.70

Stowage requirements for marine pol-

lutants. 

176.72

Handling of break-bulk hazardous 

materials. 

176.74

On deck stowage of break-bulk haz-

ardous materials. 

176.76

Transport vehicles, freight con-

tainers, and portable tanks containing 
hazardous materials. 

176.77

Stowage of barges containing haz-

ardous materials on board barge-carrying 
vessels. 

176.78

Use of power-operated industrial 

trucks on board vessels.